Module ngx_stream_ssl_module

The ngx_stream_ssl_module module (1.9.0) provides the necessary support for a stream proxy server to work with the SSL/TLS protocol. This module is not built by default, it should be enabled with the --with-stream_ssl_module configuration parameter.

To reduce the processor load, it is recommended to

• set the number of worker processes equal to the number of processors,
• enable the shared session cache,
• disable the built-in session cache,
• and possibly increase the session lifetime (by default, 5 minutes):

worker_processes auto;

stream {

    ...

    server {
        listen              12345 ssl;

        ssl_protocols       TLSv1 TLSv1.1 TLSv1.2;
        ssl_ciphers         AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5;
        ssl_certificate     /usr/local/nginx/conf/cert.pem;
        ssl_certificate_key /usr/local/nginx/conf/cert.key;
        ssl_session_cache   shared:SSL:10m;
        ssl_session_timeout 10m;

        ...
    }

Specifies a file with the certificate in the PEM format for the given server. If intermediate certificates should be specified in addition to a primary certificate, they should be specified in the same file in the following order: the primary certificate comes first, then the intermediate certificates. A secret key in the PEM format may be placed in the same file.

Since version 1.11.0, this directive can be specified multiple times to load certificates of different types, for example, RSA and ECDSA:

server {
    listen              12345 ssl;

    ssl_certificate     example.com.rsa.crt;
    ssl_certificate_key example.com.rsa.key;

    ssl_certificate     example.com.ecdsa.crt;
    ssl_certificate_key example.com.ecdsa.key;

    ...
}

Only OpenSSL 1.0.2 or higher supports separate certificate chains for different certificates. With older versions, only one certificate chain can be used.

Specifies a file with the secret key in the PEM format for the given server.

The value engine:name:id can be specified instead of the file, which loads a secret key with a specified id from the OpenSSL engine name.

ssl_ciphers HIGH:!aNULL:!MD5;

Specifies the enabled ciphers. The ciphers are specified in the format understood by the OpenSSL library, for example:

ssl_ciphers ALL:!aNULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP;

The full list can be viewed using the “openssl ciphers” command.

Specifies a file with trusted CA certificates in the PEM format used to verify client certificates.

The list of certificates will be sent to clients. If this is not desired, the ssl_trusted_certificate directive can be used.

Specifies a file with revoked certificates (CRL) in the PEM format used to verify client certificates.

Specifies a file with DH parameters for DHE ciphers.

ssl_ecdh_curve auto;

Specifies a curve for ECDHE ciphers.

When using OpenSSL 1.0.2 or higher, it is possible to specify multiple curves (1.11.0), for example:

ssl_ecdh_curve prime256v1:secp384r1;

The special value auto (1.11.0) instructs nginx to use a list built into the OpenSSL library when using OpenSSL 1.0.2 or higher, or prime256v1 with older versions.

Prior to version 1.11.0, the prime256v1 curve was used by default.

ssl_handshake_timeout 60s;

Specifies a timeout for the SSL handshake to complete.

Specifies a file with passphrases for secret keys where each passphrase is specified on a separate line. Passphrases are tried in turn when loading the key.

Example:

stream {
    ssl_password_file /etc/keys/global.pass;
    ...

    server {
        listen 127.0.0.1:12345;
        ssl_certificate_key /etc/keys/first.key;
    }

    server {
        listen 127.0.0.1:12346;

        # named pipe can also be used instead of a file
        ssl_password_file /etc/keys/fifo;
        ssl_certificate_key /etc/keys/second.key;
    }
}

ssl_prefer_server_ciphers off;

Specifies that server ciphers should be preferred over client ciphers when the SSLv3 and TLS protocols are used.

ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

Enables the specified protocols. The TLSv1.1 and TLSv1.2 parameters work only when the OpenSSL library of version 1.0.1 or higher is used.

ssl_session_cache none;

Sets the types and sizes of caches that store session parameters. A cache can be of any of the following types:

off

the use of a session cache is strictly prohibited: nginx explicitly tells a client that sessions may not be reused.

none

the use of a session cache is gently disallowed: nginx tells a client that sessions may be reused, but does not actually store session parameters in the cache.

builtin

a cache built in OpenSSL; used by one worker process only. The cache size is specified in sessions. If size is not given, it is equal to 20480 sessions. Use of the built-in cache can cause memory fragmentation.

shared

a cache shared between all worker processes. The cache size is specified in bytes; one megabyte can store about 4000 sessions. Each shared cache should have an arbitrary name. A cache with the same name can be used in several servers.

Both cache types can be used simultaneously, for example:

ssl_session_cache builtin:1000 shared:SSL:10m;

but using only shared cache without the built-in cache should be more efficient.

Sets a file with the secret key used to encrypt and decrypt TLS session tickets. The directive is necessary if the same key has to be shared between multiple servers. By default, a randomly generated key is used.

If several keys are specified, only the first key is used to encrypt TLS session tickets. This allows configuring key rotation, for example:

ssl_session_ticket_key current.key;
ssl_session_ticket_key previous.key;

The file must contain 80 or 48 bytes of random data and can be created using the following command:

openssl rand 80 > ticket.key

Depending on the file size either AES256 (for 80-byte keys, 1.11.8) or AES128 (for 48-byte keys) is used for encryption.

ssl_session_tickets on;

Enables or disables session resumption through TLS session tickets.

ssl_session_timeout 5m;

Specifies a time during which a client may reuse the session parameters.

Specifies a file with trusted CA certificates in the PEM format used to verify client certificates.

In contrast to the certificate set by ssl_client_certificate, the list of these certificates will not be sent to clients.

ssl_verify_client off;

Enables verification of client certificates. The verification result is stored in the $ssl_client_verify variable. If an error has occurred during the client certificate verification or a client has not presented the required certificate, the connection is closed.

The optional parameter requests the client certificate and verifies it if the certificate is present.

The optional_no_ca parameter requests the client certificate but does not require it to be signed by a trusted CA certificate. This is intended for the use in cases when a service that is external to nginx performs the actual certificate verification. The contents of the certificate is accessible through the $ssl_client_cert variable.

ssl_verify_depth 1;

Sets the verification depth in the client certificates chain.

The ngx_stream_ssl_module module supports variables since 1.11.2.

$ssl_cipher

returns the string of ciphers used for an established SSL connection;

$ssl_ciphers

returns the list of ciphers supported by the client (1.11.7). Known ciphers are listed by names, unknown are shown in hexadecimal, for example:

AES128-SHA:AES256-SHA:0x00ff

The variable is fully supported only when using OpenSSL version 1.0.2 or higher. With older versions, the variable is available only for new sessions and lists only known ciphers.

$ssl_client_cert

returns the client certificate in the PEM format for an established SSL connection, with each line except the first prepended with the tab character (1.11.8);

$ssl_client_fingerprint

returns the SHA1 fingerprint of the client certificate for an established SSL connection (1.11.8);

$ssl_client_i_dn

returns the “issuer DN” string of the client certificate for an established SSL connection according to RFC 2253 (1.11.8);

$ssl_client_raw_cert

returns the client certificate in the PEM format for an established SSL connection (1.11.8);

$ssl_client_s_dn

returns the “subject DN” string of the client certificate for an established SSL connection according to RFC 2253 (1.11.8);

$ssl_client_serial

returns the serial number of the client certificate for an established SSL connection (1.11.8);

$ssl_client_v_end

returns the end date of the client certificate (1.11.8);

$ssl_client_v_remain

returns the number of days until the client certificate expires (1.11.8);

$ssl_client_v_start

returns the start date of the client certificate (1.11.8);

$ssl_client_verify

returns the result of client certificate verification (1.11.8): “SUCCESS”, “FAILED:reason”, and “NONE” if a certificate was not present;

$ssl_curves

returns the list of curves supported by the client (1.11.7). Known curves are listed by names, unknown are shown in hexadecimal, for example:

0x001d:prime256v1:secp521r1:secp384r1

The variable is supported only when using OpenSSL version 1.0.2 or higher. With older versions, the variable value will be an empty string.

The variable is available only for new sessions.

$ssl_protocol

returns the protocol of an established SSL connection;

$ssl_server_name

returns the server name requested through SNI;

$ssl_session_id

returns the session identifier of an established SSL connection;

$ssl_session_reused

returns “r” if an SSL session was reused, or “.” otherwise.